LTC3115EDHD-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3115 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Output Voltage | 40V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.2V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1A 2A |
| Voltage - Output (Min/Fixed) | 2.7V |
| Topology | Buck-Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3115EDHD-1#TRPBF Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, 16 terminations are present. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space savings are achieved by placing this voltage regulator in the 16-WFDFN Exposed Pad package. In this case, DC DC switching regulator has 1 outputs configured to it. This DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. The switching frequency of this DC-DC switching regulator reaches 100kHz~2MHz. Regulator 2.2V can operate with dc to dc voltage regulator's minimum input voltage 2.2V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2.7V. It features maximum design flexibility due to dc to dc voltage regulator's 1A 2A output current. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 24V. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. The LTC3115 family of DC/DC regulators includes this DC/DC regulator. Voltage regulator is capable of giving voltage at 40V volts. During switching regulator operation, 16 pins are used. Adding the ALSO OPERATES AS LDO REGULATOR feature improves this switching regulator's efficiency and stability.
LTC3115EDHD-1#TRPBF Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
ALSO OPERATES AS LDO REGULATOR
LTC3115EDHD-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3115EDHD-1#TRPBF Voltage Regulators applications.
- Terrestrial set-top boxes
- Laboratories
- Plate bending machines
- Bending machines
- Hydraulic presses
- Communication system
- Textile machinery
- Computed tomography (CT)
- Automation technology
- Television equipment
