LTC3122IMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 12-TSSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3122 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 4.25V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 1.8V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2.5A Switch |
| Voltage - Output (Min/Fixed) | 2.2V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Voltage - Output (Max) | 15V |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3122IMSE#PBF Overview
For optimal performance, this voltage regulator makes use of the Tube package. As you can see, this harley voltage regulator contains 12 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. The space-saving 12-TSSOP (0.118, 3.00mm Width) Exposed Pad package is available for this voltage regulator. There are 1 outputs configured on this voltage regulator 12v. The adjusting voltage regulator generates Adjustable output. Surface Mount-mounting is compatible with this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. DC-DC switching regulators reach 1MHz switching frequencies. A dc to dc voltage regulator's minimum input voltage of 1.8V is required for this voltage regulator to operate. The output voltage of this voltage regulator (Min/Fixed) amounts to 2.2V volts. It features maximum design flexibility due to dc to dc voltage regulator's 2.5A Switch output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. Its NOT SPECIFIED peak reflow temperature makes this regulator essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 3.6V to meet the operation requirements. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. As a member of the LTC3122 family of DC/DC regulators, this is a DC/DC regulator. A voltage of 4.25V volts can be produced by voltage regulator. The maximum output voltage of 15V makes DC DC switching regulator easy to operate.
LTC3122IMSE#PBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
LTC3122IMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3122IMSE#PBF Voltage Regulators applications.
- Industrial robots
- Access control systems
- Surge protection circuits
- Program control systems
- Machining centers
- Automatic testing equipment
- Alternators
- Elevator lighting
- PSRR circuits
- Communication system
