LTC3202EDD
| Parameters | |
|---|---|
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 1.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | LTC3202 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 3.3V |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current-Max | 0.09A |
| Input Voltage (Max) | 4.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | DOUBLER INVERTER |
| Current - Output / Channel | 125mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Max) | 4.5V |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
LTC3202EDD Overview
There is a 10-WFDFN Exposed Pad package on the board that is used to save space. In LED drivers, the outputs are all set to 1.As a mounting method, Surface Mount is used.With high efficiency and reliable performance, it emerges as a DC DC Regulator.It is capable of working normally at -40°C~85°C TA.It provides considerable benefits for Backlight.1.5MHz is the frequency in which it operates.In this case, the termination value is 10.Undetermined failures will occur if the voltage supply is less than 2.7V.The base part number for this LED driver is LTC3202.There are 10 pins on this device.An optimal value of supply voltage is 4.5V.Furthermore, it can be categorized as Other Analog ICs based on its characteristics.When the device is operated, it has 3.3V volts assigned to it.It is greatly simplified when used with input voltages greater than or equal to 2.7V.When the input voltage is kept below 4.5V, high stability can be achieved.A maximum output current of 0.09A should be maintained.
LTC3202EDD Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.5MHz
LTC3202EDD Applications
There are a lot of Linear Technology/Analog Devices LTC3202EDD LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Stage Lighting and Signage
- Panel lighting
- LED backlight driver for LCD displays for portable equipment
- White LED Backlight for portable equipment
- Down lighting
- Scanners and Handy Terminals
- Amusement Machines
- Linear fluorescent
- A- lamps
