banner_page

LTC3202EMS#TRPBF

0.5mm PMIC LTC3202 1.5MHz 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC3202EMS#TRPBF
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 208
  • Description: 0.5mm PMIC LTC3202 1.5MHz 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Type DC DC Regulator
Terminal Finish Matte Tin (Sn)
Applications Backlight
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.5mm
Frequency 1.5MHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC3202
Pin Count 10
Number of Outputs 1
Qualification Status Not Qualified
Input Voltage-Nom 3.3V
Input Voltage (Min) 2.7V
Topology Switched Capacitor (Charge Pump)
Input Voltage (Max) 4.5V
Switcher Configuration DOUBLER INVERTER
Current - Output / Channel 125mA
Internal Switch(s) Yes
Dimming PWM
Voltage - Supply (Max) 4.5V
Voltage - Supply (Min) 2.7V
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant

LTC3202EMS#TRPBF Overview


Space is saved using its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. In this LED driver, there are 1 outputs.It adopts the way of Surface Mount for mounting.In this case, it emerges as a DC DC Regulator with a high efficiency.If the led driver ic is set to -40°C~85°C TA, it will work normally.The benefits of Backlight are considerable.On the basis of the frequency 1.5MHz, it operates.It operates with 10 terminations.Undetermined failures can occur if the voltage supply is below 2.7V.LTC3202 is the base part number for the LED driver.10 pins are on the device.This value is designed to support a maximum of 4.5V.When the device is operated, 3.3V volts are applied to the circuit.Using an input voltage greater than or equal to 2.7V provides great convenience to its operation.High stability can be ensured when the input voltage is kept below 4.5V.

LTC3202EMS#TRPBF Features


Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 1.5MHz

LTC3202EMS#TRPBF Applications


There are a lot of Linear Technology/Analog Devices LTC3202EMS#TRPBF LED Driver ICs applications.

  • Other Electronic Devices
  • General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
  • Flicker-free LED Lighting using R1580N
  • High-end retail lighting
  • Replacement lamps
  • LED Lightings for Inspection Devices
  • LED headlights
  • Scanners and Handy Terminals
  • Dimmable LED for vehicle interiors
  • General lighting

Write a review

Note: HTML is not translated!
    Bad           Good