LTC3214EDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3214 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 94 % |
| Output Voltage | 5V |
| Operating Supply Voltage | 3.3V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 2.9V |
| Output Current | 500mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.9V |
| Max Input Voltage | 4.5V |
| Switcher Configuration | DOUBLER INVERTER |
| Internal Switch(s) | Yes |
| Switching Frequency | 900kHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3214EDD#PBF Overview
To save board space, it uses the 10-WFDFN Exposed Pad package. LED drivers designed using this technology use 1 outputs.For mounting, it uses the Surface Mount method.With high reliability and efficiency, this emerges as a DC DC Regulator.It is able to work normally at the operating temperature of -40°C~85°C TA.Backlight, Lighting has considerable advantages.The terminations 10 are designed for its operation.The LED light driver has a base configuration of 10 pins.LED drivers have a base part number of LTC3214.It is acceptable for the supply voltage to be 4.5V.In this device, there are 10 pins.Additionally, it can be classified as Other Analog ICs based on its characteristics.This device requires a minimum input voltage of 2.9V.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.9V.The allowable maximum value of supply current reaches 4.5V.The current that can be supplied to the load is 500mA.The power of systems depends on having 3.3V voltages inside.It is capable of fulfilling its full functionality when the switching frequency remains at 900kHz.The output voltage is 5V.It is recommended that the output voltage be no higher than 5V.Device operation requires 3.6V volts from the circuit.
LTC3214EDD#PBF Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 3.3V
Switching frequency of 900kHz
Output voltage of 5V
LTC3214EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3214EDD#PBF LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- OLED power supply for portable equipment
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Portable lighting
- Amusement Machines
- Auxiliary lights for on-vehicle cameras
- Refrigeration lighting
- Stage and Studio lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
