LTC3215EDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3215 |
| Pin Count | 10 |
| Output Voltage | 5.1V |
| Operating Supply Voltage | 3.3V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 4.4V |
| Min Supply Voltage | 2.9V |
| Nominal Supply Current | 9.2mA |
| Output Current | 700mA |
| Max Output Voltage | 5.1V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.9V |
| Max Input Voltage | 4.4V |
| Internal Switch(s) | Yes |
| Number of Segments | 1 |
| Switching Frequency | 900kHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3215EDD#PBF Overview
Additionally, there is a 10-WFDFN Exposed Pad package for saving space.Surface Mount represents this mounting method.In this case, it emerges as a DC DC Regulator with a high efficiency.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight, Lighting has considerable advantages.The operation of this system is supported by 10 terminations.With 10 pins at the base, this LED driver has a base configuration.It consists of 1 segments.This LED driver can be found under the base part number LTC3215.The voltage of 4.4V can be supplied.On this device, there are 10 pins.In addition to Other Analog ICs, [1] is assigned in accordance with its characteristics.It operates with the minimal input voltage of 2.9V.It works with the minimal supply voltage of 2.9V to meet highest efficiency standards.When the maximum supply current is allowed, it reaches 4.4V.700mA is the maximum amount of current that can be supplied to the load.In order for systems to function, a voltage of 0 is required internally.It's possible for this electronic component to fully function when the switching frequency is maintained at 900kHz.There is 5.1V voltage output from it.If the output voltage exceeds 5.1V, it should be corrected.Device operation requires 3.6V volts from the circuit.
LTC3215EDD#PBF Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 3.3V
Switching frequency of 900kHz
Output voltage of 5.1V
LTC3215EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3215EDD#PBF LED Driver ICs applications.
- Stage and Studio lighting
- Amusement Machines
- Gallery lighting
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Linear fluorescent
- A- lamps
- Architectural lighting
- OLED power supply for portable equipment
