LTC3217EUD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3217 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 2.9V |
| Output Current | 600mA |
| Max Output Voltage | 5.05V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.9V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | DOUBLER INVERTER |
| Current - Output / Channel | 150mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 850kHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3217EUD#PBF Overview
16-WFQFN Exposed Pad package saves space on the board. It has 4 outputs for LED drivers.The led light driver is mounted using Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature for the led light driver.There are 16 terminations associated with it.To form its configuration, there are 16 pins.LTC3217 is the base part number for the LED driver.It is acceptable for the voltage to be 4.5V.16 pins are on the device.Moreover, it can be classified as Other Analog ICs due to its characteristics.A minimal input voltage of 2.9V is required for it to operate.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.9V.There is no current available to supply to the load.In order for systems to function, a voltage of 0 is required internally.This electronic component can fully perform its functions when the switching frequency is kept at 850kHz.The output voltage should not be in excess of 5.05V.When operating the device, 3.6V volts are assigned to the circuit.
LTC3217EUD#PBF Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 3.3V
Switching frequency of 850kHz
LTC3217EUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3217EUD#PBF LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Museum lighting
- Constant Voltage Power Source for portable equipment
- Down lighting
- LED Lightings for Inspection Devices
- Scanners and Handy Terminals
- A- lamps
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- Flicker-free LED Lighting using R1580N
