LTC3230EUD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3230 |
| Pin Count | 20 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 799mW |
| Output Current | 125mA |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Number of Segments | 4 |
| Switching Frequency | 900kHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3230EUD#PBF Overview
The 20-WFQFN Exposed Pad package saves space on the board. LED drivers designed using this technology use 5 outputs.In this case, mounting method is Surface Mount.When it emerges as a DC DC Regulator, it shows high-performance and reliability.-40°C~85°C TA is a valid operating temperature for the led driver.Taking advantage of Backlight has considerable benefits.A termination of 20 is used to operate the LED driver.With 20 pins at the base, this LED driver has a base configuration.There are estimated to be 4 segments.The base part number for this LED driver is LTC3230.As a maximum value, 5.5V is acceptable.On this device, there are 20 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.With a minimum input voltage of 2.7V volts, it can operate.As a result, it is designed to operate at a minimal voltage of 2.7V to ensure the most efficiency possible.In the presence of a maximum supply current, the value of 5.5V will be reached.In this case, the load can only be supplied with 125mA current.This electronic component can fully perform when the switching frequency is 900kHz.There is 5V voltage output from it.
LTC3230EUD#PBF Features
Available in the 20-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 900kHz
Output voltage of 5V
LTC3230EUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3230EUD#PBF LED Driver ICs applications.
- Amusement Machines
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- White LED Backlight for portable equipment
- General lighting
- A- lamps
- Auxiliary lights for on-vehicle cameras
- Dimmable LED for vehicle interiors
- Stage and Studio lighting
- Refrigeration lighting
