LTC3246HMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3246 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 38V |
| Output Type | Adjustable (Programmable) |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Voltage - Output (Min/Fixed) | 2.5V 3.3V 5V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 450kHz |
| Synchronous Rectifier | No |
| Switcher Configuration | BUCK-BOOST |
| Voltage - Output (Max) | 5V |
| Output Voltage-Min | 2.5V |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
LTC3246HMSE#PBF Overview
For optimal performance, this voltage regulator uses the Tube package. There are 16 terminations in this harley voltage regulator. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHED CAPACITOR CONVERTER voltage regulator. This harley voltage regulator is available in the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package for the purpose of space saving. 1 outputs of voltage regulator are configured. As you can see, this DC DC switching regulator generates Adjustable (Programmable) output on its output pins. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~150°C TJ. This DC-DC switching regulator has a switching frequency of 450kHz. Voltage regulators like this one can operate at least with 2.7V as the dc to dc voltage regulator's minimum input voltage. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2.5V 3.3V 5V. This voltage regulator 12v features maximum design flexibility thanks to its 500mA output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 38V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 12V. As part of the LTC3246 series of regulators, the voltage regulators can be found. The switching regulator operation of the system is controlled by 16 pins. 5V's maximal output voltage allows adjusting voltage regulator to operate easily.
LTC3246HMSE#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
LTC3246HMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3246HMSE#PBF Voltage Regulators applications.
- Hydrogen power
- Electrical power transmission
- Low output voltage switching power supply circuits
- Smoke exhaust equipment
- Medical monitoring systems
- Radio equipment
- Computed tomography (CT)
- Surge protection circuits
- Fire elevators
- Sink circuits
