LTC3251EMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3251 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.6V |
| Output Type | Adjustable |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Operating Supply Current | 10μA |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Max Output Voltage | 1.6V |
| Voltage - Output (Min/Fixed) | 0.9V |
| Topology | Charge Pump |
| Frequency - Switching | 1MHz~1.6MHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 900mV |
| Switcher Configuration | DOUBLER INVERTER |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3251EMSE#PBF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. There are 10 terminations in this harley voltage regulator. There is a SWITCHED CAPACITOR REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. In order to save space, this harley voltage regulator is available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. In this case, DC DC switching regulator has 1 outputs configured to it. On its output pins, this adjusting voltage regulator generates Adjustable output. This voltage regulator 12v fits the Surface Mount mounting. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. This voltage regulator 12v reaches a switching frequency of 1MHz~1.6MHz. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.9V. This voltage regulator 12v features maximum design flexibility thanks to its 500mA output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. This voltage regulator is included in the Other Analog ICs subcategory. This DC/DC regulator belongs to the LTC3251 family. A voltage of 1.6V volts can be produced by voltage regulator. In order to operate voltage regulator, there are 10 pins that must be connected. For this switching regulator, it is recommended that the output voltage is at least 900mV volts. The maximum output voltage of this regulator voltage is 1.6V. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 2.7V V is required. The maximum supply voltage for the voltage regulator 12v is 5.5V, so DC DC switching regulator can operate with a maximum voltage of 5.5V. DC-DC switching regulators operate with 10μA supply currents.
LTC3251EMSE#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LTC3251EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3251EMSE#PBF Voltage Regulators applications.
- Terrestrial set-top boxes
- Telecommunications equipment
- Flaw detection equipment
- Domestic water pumps
- Planers
- Energy management systems
- Series voltage regulation circuits
- Surge protection circuits
- Refrigerators of central air conditioners
- Machining centers
