LTC3371EFE#PBF
| Parameters | |
|---|---|
| Adjustable Threshold | YES |
| Max Output Voltage | 5.5V |
| Voltage - Output 2 | 5.5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Frequency - Switching | 2MHz |
| Current - Output 1 | 2A |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Current - Output 2 | 2A |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3371 |
| Function | Step-Down |
| Number of Outputs | 4 |
| Output Type | Adjustable |
| Voltage - Output 1 | 5.5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | Positive |
LTC3371EFE#PBF Overview
For optimal performance, this voltage regulator makes use of the Tube package. Throughout this voltage regulator, there are 38 terminations. As this regulator voltage is equipped with an analog IC of the type POWER SUPPLY SUPPORT CIRCUIT, it is a POWER SUPPLY SUPPORT CIRCUIT-type voltage regulator. This harley voltage regulator is available in the 38-TFSOP (0.173, 4.40mm Width) Exposed Pad package for the purpose of space saving. There are 4 outputs on DC DC switching regulator. There are output pins on this DC DC switching regulator that generate Adjustable output. This voltage regulator 12v fits the Surface Mount mounting. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. This DC-DC switching regulator has a switching frequency of 2MHz. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. NOT SPECIFIED is essentially indestructible due to DC DC switching regulator's peak reflow temperature. DC/DC regulators such as this one belong to the LTC3371 family of products. In order to operate voltage regulator, 38 pins are required. There should be at least a 800mV volt output voltage for this switching regulator in order to make it work properly. There is a maximum output voltage of 5.5V from this voltage regulator 12v. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 2.7V V. An operating voltage of 5.5V is the maximum supply voltage DC DC switching regulator can operate at. This voltage regulator is suitable for running at a 3.3V V supply. It is a voltage regulator 12v that has a 4 channel configuration.
LTC3371EFE#PBF Features
4 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
38 pins
4 channels
LTC3371EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3371EFE#PBF Voltage Regulators applications.
- Smart grid
- Computer monitoring equipment of building
- Wind power
- Product burn-in
- Access control systems
- Industrial controllers
- Sink circuits
- Electrical distribution systems
- Precision electronic equipment
- Computer-related products
