LTC3407AIMSE-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3407 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Voltage - Output 1 | 5V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Output 2 | 5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2.25MHz |
| Current - Output 1 | 800mA |
| Synchronous Rectifier | Yes |
| Current - Output 2 | 800mA |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3407AIMSE-2#PBF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. There are 10 terminations in this voltage regulator. This regulator voltage is equipped with a type of analog integrated circuit that is called a DUAL SWITCHING CONTROLLER voltage regulator. Space savings are achieved by placing this voltage regulator in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. There are 2 outputs configured on the voltage regulator. The adjusting voltage regulator generates Adjustable output. Surface Mount-mount switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~125°C TJ. There is a switching frequency of 2.25MHz for this voltage regulator 12v. Input voltage 2.5V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. 5.5V volts is DC DC switching regulator's maximum input voltage. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 3.6V is required to meet the requirements of the switching regulator operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. This DC/DC regulator belongs to the LTC3407 family. At 5V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 10 pins that must be connected. This voltage regulator has 1 channels.
LTC3407AIMSE-2#PBF Features
2 outputs
Peak reflow temperature (Cel) of 260
10 pins
1 channels
LTC3407AIMSE-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3407AIMSE-2#PBF Voltage Regulators applications.
- Die casting equipment
- Scientific research
- Mobile phones
- Thermal power
- Television equipment
- Plate bending machines
- Bending machines
- Computer rooms
- Wide-range voltage regulation circuits
- Elevator lighting
