LTC3407EDD-3#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3407 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Type | Fixed |
| Voltage - Output 1 | 1.8V |
| Input Voltage-Nom | 3.6V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Output 2 | 3.3V |
| Voltage - Output (Min/Fixed) | 1.8V 3.3V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2.25MHz |
| Current - Output 1 | 800mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3.3V |
| Current - Output 2 | 800mA |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3407EDD-3#PBF Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. There are 10 terminations in this voltage regulator. This regulator voltage is equipped with a type of analog integrated circuit that is called a DUAL SWITCHING CONTROLLER voltage regulator. There is a 10-WFDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. The voltage regulator is configured with 2 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 2.25MHz. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 1.8V 3.3V. 5.5V volts is DC DC switching regulator's maximum input voltage. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. An input voltage of 3.6V is required for switching regulator operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. The LTC3407 family of DC/DC regulators includes this DC/DC regulator. For switching regulator operation, 10 pins are used. There should be at least a 3.3V volt output voltage for this switching regulator in order to make it work properly. It is a voltage regulator 12v that has a 1 channel configuration.
LTC3407EDD-3#PBF Features
2 outputs
Peak reflow temperature (Cel) of 260
10 pins
1 channels
LTC3407EDD-3#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3407EDD-3#PBF Voltage Regulators applications.
- Mobile phones
- Thermal power
- Adjustable voltage or current linear circuits
- Smoke prevention equipment
- Automatic testing equipment
- Power supplies of electronic gadgets
- Various precision measuring instruments
- Printing
- Balance equipment
- CMM
