LTC3407EMSE-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3407 |
| JESD-30 Code | S-PDSO-G10 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 5.5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 800mA |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2.25MHz |
| Synchronous Rectifier | Yes |
| Voltage - Output (Max) | 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3407EMSE-2#PBF Overview
For optimal performance, this voltage regulator uses the Tube package. In this voltage regulator, 10 terminations are present. A DUAL SWITCHING CONTROLLER analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Space savings are achieved by placing this voltage regulator in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. There are 2 outputs configured on this voltage regulator 12v. Adjusting voltage regulator's output pins generate Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. 2.25MHz is the switching frequency of this DC-DC switching regulator. Despite its low input voltage, this voltage regulator can operate. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 0.6V. Featuring a maximum design flexibility of 800mA, dc to dc voltage regulator has a maximum output current of 800mA. The maximum input voltage of voltage regulator is 5.5V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. Voltage regulator is designed to provide a nominal input voltage of 3.6V to meet the operation requirements. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. The LTC3407 family of DC/DC regulators includes this DC/DC regulator. On the basis of the maximum output voltage of 5V, adjusting voltage regulator can be operated easily.
LTC3407EMSE-2#PBF Features
2 outputs
Peak reflow temperature (Cel) of 260
LTC3407EMSE-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3407EMSE-2#PBF Voltage Regulators applications.
- Boring machines
- Flaw detection equipment
- Hydraulic presses
- Drilling machines
- ATMs
- Gear/thread machining machines
- Machining centers
- Surface processing equipment
- Computer rooms
- Printing equipment
