LTC3407EMSE-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3407 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 800mA |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2.25MHz |
| Synchronous Rectifier | Yes |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3407EMSE-2#TRPBF Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. There are 10 terminations in this voltage regulator. There are two types of analog ICs on this voltage regulator. The first type is a DUAL SWITCHING CONTROLLER-type IC. The harley voltage regulator is available as a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package to save space. 2 outputs of voltage regulator are configured. There are output pins on this DC DC switching regulator that generate Adjustable output. This switching regulator is designed to fit the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 2.25MHz. Input voltage 2.5V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.6V. DC DC switching regulator's 800mA output current allows for maximum design flexibility. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. A regulator voltage's peak reflow temperature amounts to 250 being indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6V. There is a subcategory of this regulator voltage called Switching Regulator or Controllers. DC/DC regulators such as this one belong to the LTC3407 family of products. There is a possibility that DC DC switching regulator can give voltage at 5V volts. To operate the voltage regulator 12v, 10 pins are required.
LTC3407EMSE-2#TRPBF Features
2 outputs
Peak reflow temperature (Cel) of 250
10 pins
LTC3407EMSE-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3407EMSE-2#TRPBF Voltage Regulators applications.
- Gear/thread machining machines
- Electrical power transmission
- Automatic testing equipment
- SMT equipment
- Electrical distribution systems
- Balance equipment
- Automation technology
- Remotely powered electric motors
- Lathes
- Product testing
