LTC3407EMSE#TRPBF
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3407 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 600mA |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.5MHz |
| Synchronous Rectifier | Yes |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
LTC3407EMSE#TRPBF Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. There are 10 terminations in this voltage regulator. The type of analog IC that this voltage regulator is equipped with is DUAL SWITCHING CONTROLLER. Space savings are achieved by placing this voltage regulator in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. There are 2 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Adjustable output. Surface Mount-mounting is compatible with this switching regulator. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. 1.5MHz is the switching frequency of this DC-DC switching regulator. The voltage regulator can be operated with a voltage as low as 2.5V as an input voltage. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. DC DC switching regulator's maximum design flexibility comes from its output current of 600mA. Voltage regulators' input voltage is limited to 5.5V. Due to its 250 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 3.6V is required to meet the requirements of the switching regulator operation. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. As a member of the LTC3407 family of DC/DC regulators, this is a DC/DC regulator. The adjusting voltage regulator's output voltage is maintain at 5V. 10 pins are used for switching regulator operation.
LTC3407EMSE#TRPBF Features
2 outputs
Peak reflow temperature (Cel) of 250
10 pins
LTC3407EMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3407EMSE#TRPBF Voltage Regulators applications.
- Gear/thread machining machines
- Digital display device
- Handheld GPS
- Emergency lighting monitoring equipment
- Smoke prevention equipment
- Overvoltage protection circuits in TV sets
- USB circuits
- Milling machines
- Automatic testing equipment
- Scientific testing
