LTC3419EDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3419 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Voltage - Output 1 | 5.5V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Output 2 | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2.25MHz |
| Current - Output 1 | 600mA |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Current - Output 2 | 600mA |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3419EDD#PBF Overview
It is designed to provide optimal performance by utilizing the Tube package. In this voltage regulator, there are 8 terminations. A DUAL SWITCHING CONTROLLER analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-WFDFN Exposed Pad package. There are 2 outputs configured on the voltage regulator. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. Voltage regulator's switching frequency reaches 2.25MHz. The voltage regulator can be operated with a voltage as low as 2.5V as an input voltage. The output voltage of this voltage regulator (Min/Fixed) amounts to 0.6V volts. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 3.6V is provided. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. This DC/DC regulator belongs to the LTC3419 family. There is a possibility that DC DC switching regulator can give voltage at 5.5V volts. To operate the voltage regulator 12v, 8 pins are required. With 1 channels, the voltage regulator is equipped.
LTC3419EDD#PBF Features
2 outputs
Peak reflow temperature (Cel) of 260
8 pins
1 channels
LTC3419EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3419EDD#PBF Voltage Regulators applications.
- Medical equipment
- Linear guide
- Digital display device
- Smoke exhaust equipment
- Electric water heaters
- Experimental setup
- Constant current circuits
- Direct power supply system
- Sink circuits
- Imported equipment
