LTC3443EDE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Supplier Device Package | 12-DFN (4x3) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 690kHz |
| Base Part Number | LTC3443 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5.25V |
| Output Type | Adjustable |
| Max Output Current | 1.2A |
| Voltage - Input (Min) | 2.4V |
| Number of Channels | 1 |
| Output Configuration | Positive |
| Current - Output | 1.2A |
| Max Output Voltage | 5.25V |
| Voltage - Output (Min/Fixed) | 2.4V |
| Topology | Buck-Boost |
| Min Input Voltage | 2.4V |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 5.5V |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.4V |
| Voltage - Output (Max) | 5.25V |
| Height | 750μm |
| Length | 4mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3443EDE#PBF Overview
optimized performance is achieved by utilizing the Tube package in this voltage regulator. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 12-WFDFN Exposed Pad package. The voltage regulator 12v has 1 outputs. Adjusting voltage regulator's output pins generate Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. 600kHz is the switching frequency of this DC-DC switching regulator. Regulator 2.4V can operate with dc to dc voltage regulator's minimum input voltage 2.4V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2.4V. DC DC switching regulator's 1.2A output current allows for maximum design flexibility. The maximum input voltage of this voltage regulator 12v is 5.5V. In this case, the DC/DC regulator belongs to the family LTC3443. Voltage can be produced at 5.25V volts by voltage regulator. The switching regulator operation is carried out by 12 pins. This voltage regulator 12v should be configured with an output voltage that is at least 2.4V. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 1.2A A. Based on the maximal adjusting voltage regulator's output voltage of 5.25V, adjusting voltage regulator can be operated easily. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5.25V, which is the highest available. The high-limit maximum operating temperature 85°C allows harley voltage regulator stable operation. Ensures reliability by operating at aDC DC switching regulator's minimum temperature of -40°C. Input voltages as low as 2.4V can be used for DC DC switching regulator. At its maximum voltage, this DC-DC switching regulator is designed to sustain a 5.5V input voltage. A frequency of 690kHz enables dc to dc voltage regulator to maintain high accuracy. With 1 channels, the voltage regulator is equipped.
LTC3443EDE#PBF Features
1 outputs
12 pins
1 channels
LTC3443EDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3443EDE#PBF Voltage Regulators applications.
- USB circuits
- Flaw detection equipment
- Energy management systems
- Linear guide
- Product testing
- Electric water heaters
- Grinders
- SMT equipment
- Experimental setup
- Lathes
