LTC3532EDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3532 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5.25V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.4V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Max Output Voltage | 5.25V |
| Topology | Buck-Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.4V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3532EDD#PBF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. A voltage regulator consists of 10 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. There is a 10-WFDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs of voltage regulator are configured. This DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. A DC-DC switching regulator of this type operates at a switching frequency of 300kHz~2MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.4V. As a result of the 500mA output current, voltage regulator offers maximum flexibility in design. Voltage regulator has an input voltage (Max) of 5.5V. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. There is a subcategory called Switching Regulator or Controllers that includes this voltage regulator. As part of the LTC3532 series of regulators, the voltage regulators can be found. Voltage of voltage regulator can be delivered at 5.25V volts. The switching regulator operation of the system is controlled by 10 pins. The output voltage for this switching regulator should be kept at 2.4V at least. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 5.25V.
LTC3532EDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LTC3532EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3532EDD#PBF Voltage Regulators applications.
- Experimental setup
- PSRR circuits
- Correction machines
- Industrial robots
- Driver circuits
- ATMs
- Access control systems
- SMT equipment
- Serial communication converter
- Gear/thread machining machines
