LTC3542EDC#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 2.25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3542 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3542EDC#TRMPBF Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. This harley voltage regulator has 6 terminations. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. Space-saving 6-WFDFN Exposed Pad packages are available for this harley voltage regulator. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. The voltage regulator can be operated with a voltage as low as 2.5V as an input voltage. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. As a result of the 500mA output current, voltage regulator offers maximum flexibility in design. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. This voltage regulator is included in the Switching Regulator or Controllers subcategory. This DC/DC regulator belongs to the LTC3542 family. The voltage DC DC switching regulator can provide is up to 5.5V volts. 6 pins are used for switching regulator operation. This voltage regulator 12v should be configured with an output voltage that is at least 600mV. It provides the adjusting voltage regulator's maximal output voltage of 5.5V. A frequency of 2.25MHz permits DC DC switching regulator to maintain a high level of accuracy.
LTC3542EDC#TRMPBF Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
LTC3542EDC#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3542EDC#TRMPBF Voltage Regulators applications.
- Machining centers
- Arc suppression circuits
- Sensitive electronic devices
- Telecommunications equipment
- Geothermal power
- Hydrogen power
- Boring machines
- Production lines
- Post equipment
- Flaw detection equipment
