LTC3545EUD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | DUMMY VAL |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 2.25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3545 |
| Function | Step-Down |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Voltage - Output 1 | 5.5V |
| Voltage - Input (Min) | 2.25V |
| Input Voltage-Nom | 3.6V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Voltage - Output 2 | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output 1 | 800mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Current - Output 2 | 800mA |
| Height | 700μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3545EUD#PBF Overview
For optimal performance, this voltage regulator uses the Tube package. This harley voltage regulator has 16 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this voltage regulator is packaged in the 16-WFQFN Exposed Pad package. 3 outputs have been configured in the voltage regulator 12v. The adjusting voltage regulator generates Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. Voltage regulators like this one can operate at least with 2.25V as the dc to dc voltage regulator's minimum input voltage. The output voltage of this voltage regulator (Min/Fixed) amounts to 0.6V volts. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. An input voltage of 3.6V is required to meet the requirements of the switching regulator operation. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. As a member of the LTC3545 family of DC/DC regulators, this is a DC/DC regulator. The adjusting voltage regulator's output voltage is maintain at 5.5V. In order to operate voltage regulator, there are 16 pins that must be connected. This voltage regulator 12v should be configured with an output voltage that is at least 600mV. It provides the adjusting voltage regulator's maximal output voltage of 5.5V. Switching regulators with the DUMMY VAL feature are more efficient and stable than those without. With a frequency of 2.25MHz, dc to dc voltage regulator has high accuracy. It has 1 channels of voltage regulator.
LTC3545EUD#PBF Features
3 outputs
Peak reflow temperature (Cel) of 260
16 pins
DUMMY VAL
1 channels
LTC3545EUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3545EUD#PBF Voltage Regulators applications.
- Experimental setup
- Remotely powered electric motors
- Domestic water pumps
- Power supplies of electronic gadgets
- Post equipment
- Thermal power
- Correction machines
- Hydrogen power
- Industrial robots
- Window air conditioners
