LTC3565IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3565 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1.25A |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 4MHz |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3565IDD#PBF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. There are 10 terminations in this harley voltage regulator. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. The harley voltage regulator is available as a 10-WFDFN Exposed Pad package to save space. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Adjustable output. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. The switching frequency of this DC-DC switching regulator reaches Up to 4MHz. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.6V. A maximum design flexibility is provided by the 1.25A output current of voltage regulator. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. A regulator with this 260 peak reflow temperature is essentially indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 3V for operation. This voltage regulator is included in the Switching Regulator or Controllers subcategory. As part of the LTC3565 series of regulators, the voltage regulators can be found. Voltage regulator is capable of giving voltage at 5V volts. During switching regulator operation, 10 pins are used. Ideally this switch regulator should have an output voltage of about 600mV at the very least. A maximum voltage of 5V can be obtained from the regulator voltage.
LTC3565IDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LTC3565IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3565IDD#PBF Voltage Regulators applications.
- Product burn-in
- Medical equipment
- Hydraulic presses
- CNC system
- Surge protection circuits
- Hydrogen power
- Electrical power transmission
- Geothermal power
- Handheld GPS
- Thermal power
