LTC3603IMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3603 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 15V |
| Output Voltage | 14.85V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2.5A |
| Max Output Voltage | 14.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Length | 4.039mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3603IMSE#PBF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. In this voltage regulator, 16 terminations are present. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space savings are achieved by placing this voltage regulator in the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package. There are 1 outputs configured on the voltage regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. The switching frequency of this DC-DC switching regulator reaches 1MHz. The voltage regulator can be operated with a voltage as low as 4.5V as an input voltage. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. Featuring a maximum design flexibility of 2.5A, dc to dc voltage regulator has a maximum output current of 2.5A. Voltage regulator has an input voltage (Max) of 15V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. An input voltage of 12V is required for switching regulator operation. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. This DC/DC regulator belongs to the LTC3603 family. There is a possibility that DC DC switching regulator can give voltage at 14.85V volts. To operate the voltage regulator 12v, 16 pins are required. For this switching regulator, it is recommended that the output voltage is at least 600mV volts. A maximum voltage of 14.5V can be obtained from the regulator voltage.
LTC3603IMSE#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
LTC3603IMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3603IMSE#PBF Voltage Regulators applications.
- Pipe bending machines
- Solar power plants
- Flaw detection equipment
- Low output voltage switching power supply circuits
- Adjustable voltage or current linear circuits
- Sink circuits
- Lathes
- Smart grid
- Hydraulic presses
- SMT equipment
