banner_page

LTC3607EUD#PBF

16 Terminals 4.5V 16-Pin LTC3607 DC DC Voltage Regulator SWITCHING REGULATOR 2 Outputs 2.25MHz Tube 600mA 16-WFQFN Exposed Pad


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC3607EUD#PBF
  • Package: 16-WFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 349
  • Description: 16 Terminals 4.5V 16-Pin LTC3607 DC DC Voltage Regulator SWITCHING REGULATOR 2 Outputs 2.25MHz Tube 600mA 16-WFQFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-WFQFN Exposed Pad
Number of Pins 16
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2011
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Technology CMOS
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number LTC3607
Function Step-Down
Number of Outputs 2
Efficiency 96 %
Output Type Adjustable
Voltage - Input (Min) 4.5V
Input Voltage-Nom 12V
Analog IC - Other Type SWITCHING REGULATOR
Output Configuration Positive
Current - Output 600mA
Max Output Voltage 15V
Voltage - Output (Min/Fixed) 0.6V
Topology Buck
Control Mode CURRENT-MODE
Frequency - Switching 2.25MHz
Synchronous Rectifier Yes
Min Output Voltage 600mV
Height Seated (Max) 0.8mm
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant

LTC3607EUD#PBF Overview


As a result of the use of the Tube package, the performance of this voltage regulator is optimized. During the development of this harley voltage regulator, 16 terminations were made. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. There is a 16-WFQFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. 2 outputs of voltage regulator are configured. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. This voltage regulator 12v fits the Surface Mount mounting. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. 2.25MHz is the switching frequency of this DC-DC switching regulator. Voltage regulators like this one can operate at least with 4.5V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. Featuring a 600mA output current, dc to dc voltage regulator offers maximum design flexibility. A regulator voltage's peak reflow temperature amounts to NOT SPECIFIED being indestructible. For operation, switching regulator requires a nominal input voltage of 12V. DC/DC regulators of this type are part of the LTC3607 family of voltage regulator 12vs. There are 16 pins used for switching regulator operation. Ideally this switch regulator should have an output voltage of about 600mV at the very least. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 15V.

LTC3607EUD#PBF Features


2 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
16 pins

LTC3607EUD#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC3607EUD#PBF Voltage Regulators applications.

  • Surge protection circuits
  • Sink circuits
  • Linear guide
  • Magnetohydrodynamic power
  • Laboratories
  • Printing
  • Electric heating, lighting
  • Correction machines
  • Computed tomography (CT)
  • Electric water heaters

Write a review

Note: HTML is not translated!
    Bad           Good