LTC3614IUDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3614 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.25V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 4A |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz~4MHz |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3614IUDD#PBF Overview
A Tube package is used in this voltage regulator to optimize performance. In this voltage regulator, there are 24 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. In order to save space, this voltage regulator is packaged in the 24-WFQFN Exposed Pad package. There are 1 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Adjustable output. A Surface Mount mounting is required for this switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -55°C~150°C TJ. In this voltage regulator 12v, the switching frequency is 300kHz~4MHz. A dc to dc voltage regulator's minimum input voltage of 2.25V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.6V. This voltage regulator 12v offers maximum design flexibility with an output current of 4A. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.3V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. In this case, the DC/DC regulator belongs to the family LTC3614. The adjusting voltage regulator's output voltage is maintain at 5.5V. For switching regulator operation, 24 pins are used. The output voltage of this voltage regulator 12v should at least be set at 600mV volts at all times. An output voltage of 5.5V is provided by this regulator voltage.
LTC3614IUDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
24 pins
LTC3614IUDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3614IUDD#PBF Voltage Regulators applications.
- Series voltage regulation circuits
- Arc suppression circuits
- Plate bending machines
- CMM
- Industrial robots
- Driver circuits
- Surface processing equipment
- Emergency lighting monitoring equipment
- Industrial controllers
- ATMs
