LTC3630IDHC#PBF
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3630 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 85 % |
| Output Voltage | 1.8V |
| Output Type | Adjustable (Programmable) |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative |
| Current - Output | 500mA |
| Max Output Voltage | 65V |
| Voltage - Output (Min/Fixed) | 0.8V 1.8V 3.3V 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 5V |
| Switching Frequency | 750kHz |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
LTC3630IDHC#PBF Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. Throughout this voltage regulator, there are 16 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. There is a 16-WFDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. A total of 1 outputs are configured in this voltage regulator. DC DC switching regulators like this one generate Adjustable (Programmable) outputs on their output pins to handle the power management. This switching regulator is designed to fit the Surface Mount mounting system. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 4V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V 1.8V 3.3V 5V. It features maximum design flexibility due to dc to dc voltage regulator's 500mA output current. A regulator voltage's peak reflow temperature amounts to NOT SPECIFIED being indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 12V for operation. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. In the particular voltage regulators, the LTC3630 family is represented. A voltage of 1.8V volts can be generated by DC DC switching regulator. To operate the voltage regulator 12v, 16 pins are required. Ideally this switch regulator should have an output voltage of about 5V at the very least. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 65V. It is possible to improve reliability by increasing the DC DC switching regulator's switching frequency to 750kHz.
LTC3630IDHC#PBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
16 pins
LTC3630IDHC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3630IDHC#PBF Voltage Regulators applications.
- Milling machines
- Medical equipment
- Shearing machines
- Computed tomography (CT)
- Electrical power transmission
- Industrial robots
- Automatic plug-in machines
- Pipe bending machines
- Surface processing equipment
- Electric heating, lighting
