LTC3639EMSE#PBF
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 150V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 100mA |
| Max Output Voltage | 150V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad, 12 Leads |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3639 |
| Function | Step-Down |
LTC3639EMSE#PBF Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, 12 terminations are present. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. This harley voltage regulator is available in the 16-TFSOP (0.118, 3.00mm Width) Exposed Pad, 12 Leads package for the purpose of space saving. 1 outputs have been configured in the voltage regulator 12v. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. This voltage regulator 12v fits the Surface Mount mounting. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 4V. The output voltage (Min/Fixed) of this voltage regulator 12v is 0.8V. DC DC switching regulator's 100mA output current allows for maximum design flexibility. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. To meet the operation requirements, voltage regulator is designed to provide 12V as the nominal input voltage. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. As part of the LTC3639 series of regulators, the voltage regulators can be found. The adjusting voltage regulator's output voltage is maintain at 150V. In order to operate voltage regulator, 12 pins are required. In order for this switching regulator to work properly, the output voltage should be at least 800mVV. A maximum voltage of 150V can be obtained from the regulator voltage.
LTC3639EMSE#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
12 pins
LTC3639EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3639EMSE#PBF Voltage Regulators applications.
- Scientific testing
- Sensitive electronic devices
- Elevator lighting
- Series voltage regulation circuits
- Arc suppression circuits
- Hydraulic presses
- Hydro power
- Motor controller circuits
- Laboratories
- Shearing machines
