LTC3701EGN#PBF
| Parameters | |
|---|---|
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3701 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 10.3V |
| Output Type | Transistor Driver |
| Max Output Current | 2A |
| Input Voltage-Nom | 4.2V |
| Number of Channels | 1 |
| Element Configuration | Dual |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2.5V~10V |
| Control Features | Enable, Power Good |
| Max Output Voltage | 10.3V |
| Topology | Buck |
| Min Input Voltage | 2.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 550kHz |
| Max Input Voltage | 10V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 890kHz |
| Duty Cycle (Max) | 100% |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.988mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
LTC3701EGN#PBF Overview
It comes in the 16-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 2 outputs. An enclosure of Tube is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. 2.5V~10V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. The switching controller can be switched at 550kHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Power Good. There are many different types of terminations for 16. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 4.2V. You can find other relevant dc to dc converter ics by searching "LTC3701". There are a total of 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 10.3V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. It is estimated that this dc regulatorhas a maximum frequency of 890kHz. The maximum input voltage of dc switcher is 10V, so users should limit their voltage accordingly. 2.5V is the required supply voltage. Output current will not exceed 2A. Datasheets indicate that the switching converter can output 10.3V volts at its maximum. Communication with high quality requires 1 channels.
LTC3701EGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 550kHz
Enable, Power Good
PULSE WIDTH MODULATION
LTC3701EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3701EGN#PBF DC to DC converter applications.
- Computed tomography (CT)
- Electrical distribution systems
- Electric heating, lighting
- Drilling machines
- Digital precision reference circuits
- Refrigerators of central air conditioners
- Various precision measuring detectors
- Scientific research
- Medical monitoring systems
- Printing
