LTC3703EGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3703 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 93V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 9.3V~15V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 9.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 330kHz |
| Duty Cycle (Max) | 93% |
| Length | 4.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3703EGN#TRPBF Overview
With its 16-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 9.3V~15V and has a 9.3V~15V supply voltage. Worked in a -40°C~85°C TA dc switcher before. With this switching controller, you can switch at 100kHz~600kHz. A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LTC3703". In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 9.3V is the minimum required for the dc dc voltage regulator. DC regulator outputs 93V voltage according to the test statistics. normally, the dc dc regulator's output current is 10A, which you should keep in mind when starting a project. There is a maximum frequency of 330kHz on this dc regulators.
LTC3703EGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3703EGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3703EGN#TRPBF DC to DC converter applications.
- USB circuits
- SMT equipment
- Direct power supply system
- Computer rooms
- Game consoles
- Arc suppression circuits
- Telecommunications equipment
- Planers
- Hydrogen power
- Cutting machine tools
