LTC3703EG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3703 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 9.3V~15V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Min Input Voltage | 9.3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 93% |
| Height | 2mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3703EG#PBF Overview
As a result of 28-SSOP (0.209, 5.30mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 9.3V~15V voltage are supplied and operated. Qualified to work in a -40°C~85°C TA dc switcher. There is a switch at 100kHz~600kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. 28 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. Searching "LTC3703" will return other relevant dc to dc converter ics. There are only 28 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 100V voltage. In most cases, the dc dc regulator's output current is 5A. This information should be noted when you begin working with the component. Switching controller operates at a frequency of 300kHz. The dc switcher's maximum input voltage is 15V, so users must limit the voltage accordingly. A voltage of 9.3V is required for the supply.
LTC3703EG#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
LTC3703EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3703EG#PBF DC to DC converter applications.
- Flexible manufacturing cells
- Flaw detection equipment
- Precision electronic equipment
- Surface processing equipment
- Product burn-in
- Various precision measuring detectors
- Computer-related products
- Communication system
- Smoke prevention equipment
- Current source circuits
