LTC3703HGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3703 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 93V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 9.3V~15V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 9.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 330kHz |
| Duty Cycle (Max) | 93% |
| Length | 4.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3703HGN#TRPBF Overview
With a 16-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). 9.3V~15V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~150°C TJ. The switching controller can be switched at 100kHz~600kHz. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 10V. LTC3703 can be searched for other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 9.3V. A 93V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. DC regulators have a maximum frequency of 330kHz.
LTC3703HGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3703HGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3703HGN#TRPBF DC to DC converter applications.
- Milling machines
- seismic instrument power circuits
- Medical equipment
- Radio equipment
- Driver circuits
- Automatic testing equipment
- Various CNC machine tools
- Scientific testing
- Smart grid
- Grinders
