LTC3704EMS#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3704 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -72V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Negative |
| Voltage - Supply (Vcc/Vdd) | 2.5V~36V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
| Topology | Cuk |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 92% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3704EMS#TRPBF Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 2.5V~36V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. Switching can be done at 50kHz~1MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of 10 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 5V. In addition to "LTC3704", there are other relevant dc to dc converter ics you can find. There are only 10 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 2.5V. A -72V voltage of DC regulator was detected in the test statistics. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. DC regulator has a maximum frequency of 1MHz. The output of this function is the greatest value of 0.05A.
LTC3704EMS#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LTC3704EMS#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3704EMS#TRPBF DC to DC converter applications.
- Emergency lighting monitoring equipment
- Electrical power transmission
- Radio equipment
- Wind power
- Refrigerators of central air conditioners
- Gear/thread machining machines
- Digital display device
- Grinders
- Automation technology
- Arc suppression circuits
