LTC3707EGN-SYNC#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3707 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 220kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3707EGN-SYNC#TRPBF Overview
As a result of 28-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. A 4.5V~28V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 220kHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Power Good, Soft Start is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at DUAL . 28 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. LTC3707 can be searched for other relevant dc to dc converter ics. 28 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 7V voltage. DC regulators have a maximum frequency of 360kHz. The output value is set to the greatest value of 3A. Communication with high quality requires 1 channels.
LTC3707EGN-SYNC#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3707EGN-SYNC#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3707EGN-SYNC#TRPBF DC to DC converter applications.
- Motor controller circuits
- Thermal power
- Wind power
- Current source circuits
- Computer rooms
- Arc suppression circuits
- Laboratories
- Balance equipment
- Grinders
- Product burn-in
