LTC3707EGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3707 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 220kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 15V |
| Switcher Configuration | PHASE-SHIFT |
| Input Current | 350μA |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 9.98mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3707EGN#PBF Overview
Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 2 outputs. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~28V. Qualified to work in an dc switcher with -40°C~85°C TA. With this switching controller, you can switch at 220kHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of 28 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 15V. Searching "LTC3707" will return other relevant dc to dc converter ics. Total pins of switching converter are 28. Particularly, switching converter is a type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 30V voltage. You should note that the dc dc regulator's usual output current is 3A. Switching controllers work at 300kHz Hz. It is possible to set the input voltage to 15V for nominal working status. In order to ensure high-quality communication, there are 1 channels available. It could be possible to satisfy the switching converter for operation with a current flow input of 350μA.
LTC3707EGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
LTC3707EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3707EGN#PBF DC to DC converter applications.
- Automatic plug-in machines
- Surface processing equipment
- Industrial controllers
- Computed tomography (CT)
- Window air conditioners
- Automation technology
- Current source circuits
- Machining centers
- Flexible manufacturing cells
- seismic instrument power circuits
