LTC3707IGN-SYNC#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3707 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 220kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 360kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC3707IGN-SYNC#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 28-SSOP (0.154, 3.90mm Width) package. For 2 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 4.5V~28V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller can be switched at 220kHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Power Good, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 28 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. In addition to "LTC3707", there are other relevant dc to dc converter ics you can find. There are 28 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 7V. It is estimated that this dc regulatorhas a maximum frequency of 360kHz. Current is output to the greatest value of 3A. Channels 1 are required for high-quality communication.
LTC3707IGN-SYNC#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3707IGN-SYNC#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3707IGN-SYNC#TRPBF DC to DC converter applications.
- Medical monitoring systems
- Injection molding machinery
- Computer monitoring equipment of building
- Magnetohydrodynamic power
- Mobile phones
- Pipe bending machines
- Milling machines
- Scientific research
- ATMs
- Wide-range voltage regulation circuits
