LTC3709EG#PBF
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3709 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 32.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | 3.9V~37V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 6.5V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 200kHz |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
LTC3709EG#PBF Overview
With its 36-SSOP (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 2. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 3.9V~37V volts and has 3.9V~37V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Enable, Power Good, Soft Start, Tracking is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 36 terminations with various dc switching's functions. DC switcher's voltage input is 5V. LTC3709 can be searched for other relevant dc to dc converter ics. 36 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 32.4V. It should be fully noted that the dc to dc regulator only accepts 6.5V input voltage at most. You should note down the dc dc regulator's usual output current of 40A when you start a project. DC regulators have a maximum frequency of 200kHz. Thare are switch converters of the PolyPhase? series. A high-quality communication requires 1 channels.
LTC3709EG#PBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start, Tracking
LTC3709EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3709EG#PBF DC to DC converter applications.
- Thermal power
- Printing
- Arc suppression circuits
- Computer rooms
- Grinders
- Game consoles
- Industrial controllers
- Balance equipment
- Access control systems
- Current source circuits
