LTC3709EUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3709 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 32.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | 3.9V~37V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 6.5V |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 200kHz |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3709EUH#TRPBF Overview
Capsuled in the 32-WFQFN Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 2 input. There is a Tape & Reel (TR) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 3.9V~37V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Power Good, Soft Start, Tracking. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . 32 terminations with a variety of function. There is a DC switcher's nominal voltage of 5V. Search for "LTC3709" to find other relevant dc to dc converter ics. There are only 32 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 32.4V. The dc to dc regulator can only accept a maximum input voltage of 6.5V. You should note down the dc dc regulator's usual output current of 40A when you start a project. 200kHz is the maximum frequency of this dc regulators. Thare are switch converters of the PolyPhase? series. A high-quality communication requires 1 channels.
LTC3709EUH#TRPBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start, Tracking
LTC3709EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3709EUH#TRPBF DC to DC converter applications.
- Fire elevators
- Computer rooms
- Computer application technology
- Experimental setup
- Mobile phones
- Milling machines
- Scientific research
- Arc suppression circuits
- Printing equipment
- Thermal power
