LTC3716EG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3716 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 3.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 140kHz~310kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PHASE-SHIFT CONTROL |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Input Current | 1.2mA |
| Duty Cycle (Max) | 99.5% |
| Clock Sync | No |
| Height | -50μm |
| Length | 13.1mm |
| Width | 5.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3716EG#PBF Overview
It comes in a 36-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 2. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4V~36V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 140kHz~310kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 36 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PHASE-SHIFT CONTROL. DC switcher's input voltageis 15V volts. In addition to "LTC3716", there are other relevant dc to dc converter ics you can find. In total, switching converter has 36 pins. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 3.6V. Test statistics indicate DC regulator outputs 36V voltage. The dc to dc regulator is limited to 30V input voltage. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. Switching controller operates at a frequency of 300kHz. There are 1 channels for high-quality communication. If the current flow input is 1.2mA, the switching converter could operate.
LTC3716EG#PBF Features
Transistor Driver Outputs
Switching Frequency: 140kHz~310kHz
Enable, Power Good, Soft Start
PHASE-SHIFT CONTROL
Frequency: 300kHz
LTC3716EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3716EG#PBF DC to DC converter applications.
- Wind power
- Experimental setup
- Geothermal power
- Cutting machine tools
- Arc suppression circuits
- Electric water heaters
- Computer-related products
- Program control systems
- Scientific testing
- Adjustable voltage or current linear circuits
