LTC3722EGN-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3722 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | 3.8V~10.25V |
| Quiescent Current | 5mA |
| Control Features | Current Limit, Ramp, Soft Start |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 98.5% |
| Switching Frequency | 275kHz |
| Output Phases | 2 |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3722EGN-2#TRPBF Overview
It comes in the 24-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For outputs of 6, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. A 3.8V~10.25V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Ramp, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. The 24 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 9.5V nominal DC switcher's voltage input. In addition to "LTC3722", there are other relevant dc to dc converter ics you can find. 24 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 5V. You should note that the dc dc regulator's usual output current is 100A. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. During dormancy, the dc switching uses 5mA. At 275kHz, this controller will mostly work as expected.
LTC3722EGN-2#TRPBF Features
Transistor Driver Outputs
Current Limit, Ramp, Soft Start
PULSE WIDTH MODULATION
Switching Frequency: 275kHz
LTC3722EGN-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3722EGN-2#TRPBF DC to DC converter applications.
- Servo drive system
- Motor controller circuits
- Correction machines
- Smoke prevention equipment
- Serial communication converter
- Smart grid
- PSRR circuits
- Experimental setup
- Bending machines
- Electric water heaters
