LTC3723EGN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3723 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | Up to 10V |
| Control Features | Current Limit, Ramp, Soft Start |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 72V |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 50 % |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 4.98mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3723EGN-1#PBF Overview
The switching controller fits in the 16-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sUp to 10V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. Current Limit, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 16 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 9.5V. Other relevant dc to dc converter ics will be returned if you search "LTC3723". There are 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 5.5V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers work at 1MHz Hz. Input voltage can be set to 72V for nominal working status. This controller performs best at a frequency of 1MHz.
LTC3723EGN-1#PBF Features
Transistor Driver Outputs
Current Limit, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz
LTC3723EGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3723EGN-1#PBF DC to DC converter applications.
- Injection molding machinery
- SMT equipment
- Cutting machine tools
- Electric heating, lighting
- seismic instrument power circuits
- Magnetohydrodynamic power
- Industrial controllers
- Correction machines
- Plate bending machines
- Linear guide
