LTC3723EGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3723 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Up to 10V |
| Control Features | Current Limit, Ramp, Soft Start |
| Input Voltage (Min) | 6.5V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 9.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 50% |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Height Seated (Max) | 1.75mm |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3723EGN-1#TRPBF Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). Up to 10V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 9.5V. Search for "LTC3723" to find other relevant dc to dc converter ics. 16 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 6.5V. It should be noted that the dc to dc regulator only accepts 9.5V voltage as input voltage. normally, the dc dc regulator's output current is 1.5A, which you should keep in mind when starting a project. Switching controllers work at 1MHz Hz. 1MHz is the frequency at which this controller can mostly perform fine.
LTC3723EGN-1#TRPBF Features
Transistor Driver Outputs
Current Limit, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
Switching Frequency: 1MHz
LTC3723EGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3723EGN-1#TRPBF DC to DC converter applications.
- Energy management systems
- Wide-range voltage regulation circuits
- Plate bending machines
- Current source circuits
- Window air conditioners
- Direct power supply system
- Communication system
- Medical monitoring systems
- Domestic water pumps
- Flaw detection equipment
