LTC3723EGN-2#PBF
| Parameters | |
|---|---|
| Terminal Pitch | 0.635mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3723 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Up to 10V |
| Control Features | Current Limit, Ramp, Soft Start |
| Input Voltage (Min) | 6.5V |
| Topology | Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 9.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 50% |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Height Seated (Max) | 1.75mm |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
LTC3723EGN-2#PBF Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at Up to 10V volts and has Up to 10V supply voltage. Worked in a -40°C~85°C TA dc switcher before. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 9.5V is input. Searching "LTC3723" will return other relevant dc to dc converter ics. 16 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. 6.5V should be the minimum input voltage for the dc dc voltage regulator. The dc to dc regulator can only accept 9.5V input voltage. If you start a project, note down the dc dc regulator's usual output current of 1.5A. There is 1MHz frequency setting on the switching controller. When this switching controller is running at frequency 1MHz, it can perform well in most cases.
LTC3723EGN-2#PBF Features
Transistor Driver Outputs
Current Limit, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
Switching Frequency: 1MHz
LTC3723EGN-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3723EGN-2#PBF DC to DC converter applications.
- Photovoltaic power
- Computer rooms
- Motor controller circuits
- Product burn-in
- Computer monitoring equipment of building
- Access control systems
- Surge protection circuits
- Planers
- Sink circuits
- Smart grid
