LTC3723EGN-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3723 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Up to 10V |
| Control Features | Current Limit, Ramp, Soft Start |
| Input Voltage (Min) | 6.5V |
| Topology | Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 9.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 50% |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Height Seated (Max) | 1.75mm |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3723EGN-2#TRPBF Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at Up to 10V volts and has Up to 10V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Current Limit, Ramp, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . 16 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 9.5V volts. LTC3723 can be searched for other relevant dc to dc converter ics. 16 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 6.5V is the minimum required for the dc dc voltage regulator. A maximum voltage of 9.5V is accepted by the dc to dc regulator as an input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1.5A. DC regulator1MHz has the maximum frequency. At 1MHz, this controller performs best.
LTC3723EGN-2#TRPBF Features
Transistor Driver Outputs
Current Limit, Ramp, Soft Start
PULSE WIDTH MODULATION
Switching Frequency: 1MHz
LTC3723EGN-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3723EGN-2#TRPBF DC to DC converter applications.
- Linear guide
- Program control systems
- Printing equipment
- Window air conditioners
- Special machining machine tools
- Magnetohydrodynamic power
- Hydrogen power
- Thermal power
- Imported equipment
- Boring machines
