LTC3727IG-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3727 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 14V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 255kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC3727IG-1#PBF Overview
It comes in a 28-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Tube solid enclosure. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~30V. Suitable for a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 255kHz~530kHz . The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 28 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. In addition to "LTC3727", there are other relevant dc to dc converter ics you can find. There are a total of 28 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. Test statistics indicate DC regulator outputs 14V voltage. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. There is a maximum frequency of 580kHz on this dc regulators. 3A is the largest value switching converter outputs. Channels 1 are required for high-quality communication.
LTC3727IG-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 255kHz~530kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3727IG-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3727IG-1#PBF DC to DC converter applications.
- Computer rooms
- Digital precision reference circuits
- Digital display device
- Computed tomography (CT)
- Access control systems
- Telecommunications equipment
- Post equipment
- Serial communication converter
- Plate bending machines
- Alternators
