LTC3727IG-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3727 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 14V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 255kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC3727IG-1#TRPBF Overview
Capsuled in the 28-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. For outputs of 2, this dc motor controller is suitable. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 4V~30V volts and has 4V~30V supply voltage. Suitable for a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 255kHz~530kHz . The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Power Good, Soft Start which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 28 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC3727 can be searched for other relevant dc to dc converter ics. Pins number 28 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 4V is the minimum required for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 14V. Voltages 36V are the maximum that the dc to dc regulator will accept. 580kHz is the maximum frequency of this dc regulators. Switching converter outputs current to the greatest value of 3A. Channels are 1 for high-quality communication.
LTC3727IG-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 255kHz~530kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3727IG-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3727IG-1#TRPBF DC to DC converter applications.
- Pipe bending machines
- Power supplies of electronic gadgets
- Packaging
- Computer application technology
- Precision electronic equipment
- Hydrogen power
- Surge protection circuits
- CNC system
- Servo drive system
- Large fire protection systems
