LTC3727LXEUH-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3727 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 14V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4V~28V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 255kHz~530kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3727LXEUH-1#TRPBF Overview
It comes in a 32-WFQFN Exposed Pad package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 2 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4V~28V. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller can be switched at 255kHz~530kHz. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. A variety of 32 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. A search for "LTC3727" will reveal other relevant dc to dc converter ics. 32 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. 4V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 14V. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. 580kHz is the maximum frequency of this dc regulators. In order to ensure high-quality communication, there are 1 channels available.
LTC3727LXEUH-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 255kHz~530kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3727LXEUH-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3727LXEUH-1#TRPBF DC to DC converter applications.
- Alternators
- Medical monitoring systems
- Electrical distribution systems
- Hydro power
- Current source circuits
- Printing equipment
- Die casting equipment
- Boring machines
- Production lines
- Medical equipment
