LTC3728LIGN-1#PBF
| Parameters | |
|---|---|
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 260kHz~550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 590kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3728 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~35V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
LTC3728LIGN-1#PBF Overview
This switching controller fits most application requirements since it is packaged in a 28-SSOP (0.154, 3.90mm Width) package. dc motor controller is suitable for 2 output generation. PMIC is packaged in a solid enclosure of Tube. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 4.5V~35V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. Switching can be done at 260kHz~550kHz with this switching controller. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Enable, Power Good, Soft Start. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. 28 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. In addition to "LTC3728", there are other relevant dc to dc converter ics you can find. Pins number 28 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 3.35V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe max frequency of the pmic can reach 590kHz. It is recommended that there be 1 channels for high-quality communication.
LTC3728LIGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3728LIGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3728LIGN-1#PBF DC to DC converter applications.
- Gear/thread machining machines
- Digital display device
- Smoke prevention equipment
- Cutting machine tools
- Milling machines
- Domestic water pumps
- Printing equipment
- Laboratories
- Combined machine tools
- Arc suppression circuits
