LTC3728LIGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3728 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 3.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 260kHz~550kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 590kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC3728LIGN#TRPBF Overview
Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For outputs of 2, this dc motor controller is suitable. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 4.5V~28V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 260kHz~550kHz. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. The 28 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "LTC3728". In total, switching converter has 28 pins. Switching converter is a type of Switching Regulator or Controllers in particular. 3.6V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 3.35V. The dc to dc regulator can only accept a maximum input voltage of 30V. The max frequency of the pmic can reach 590kHz. Switching converter outputs current to the greatest value of 3A. There are 1 channels for high-quality communication.
LTC3728LIGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3728LIGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3728LIGN#TRPBF DC to DC converter applications.
- Combined machine tools
- Pipe bending machines
- Computer-related products
- Various precision measuring instruments
- Flaw detection equipment
- Wide-range voltage regulation circuits
- Boring machines
- Computed tomography (CT)
- Refrigerators of central air conditioners
- Gear/thread machining machines
