LTC3729LEUH-6#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3729 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 240A |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Current Limit, Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 260kHz~550kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 620kHz |
| Duty Cycle (Max) | 99.5% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3729LEUH-6#PBF Overview
It comes in the 32-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). A 4V~30V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It can switch at 260kHz~550kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Enable, Phase Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at QUAD . There are many different types of terminations for 32. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Searching "LTC3729" will return other relevant dc to dc converter ics. In total, switching converter has 32 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5V. The dc to dc regulator can only accept a maximum input voltage of 30V. You should note that the dc dc regulator's usual output current is 240A. DC regulator has a maximum frequency of 620kHz. The dc to dc voltage regulator is from the PolyPhase? series. Channels are 1 for high-quality communication.
LTC3729LEUH-6#PBF Features
Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Current Limit, Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3729LEUH-6#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3729LEUH-6#PBF DC to DC converter applications.
- Current source circuits
- Boring machines
- Solar power plants
- Domestic water pumps
- Industrial robots
- Program control systems
- Magnetohydrodynamic power
- Electric water heaters
- Communication system
- Network technology
