LTC3731IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3731 |
| Function | Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 6V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 3.8V~7V |
| Control Features | Enable, Phase Control, Power Good, Soft Start |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 225kHz~680kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 28V |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 98.5% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3731IUH#PBF Overview
The switching controller fits in the 32-WFQFN Exposed Pad package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 3. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 3.8V~7V volts and has 3.8V~7V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 225kHz~680kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Phase Control, Power Good, Soft Start is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. QUAD are the position of the terminal of the switching converters. Various 32 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 5V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LTC3731". 32 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 6V. The dc dc regulator's usual output current is 5A, which should be noted down when you start a project. Switching controller operates at 400kHz Hz. Thare are switch converters of the PolyPhase? series. It is possible to set the input voltage as 28V for nominal working statuses. Channels are 1 for high-quality communication.
LTC3731IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 225kHz~680kHz
Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 400kHz
LTC3731IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3731IUH#PBF DC to DC converter applications.
- Analog precision reference circuits
- Various precision measuring instruments
- Imported equipment
- Mobile phones
- Pipe bending machines
- Constant current circuits
- Television equipment
- Smoke prevention equipment
- Wind power
- Plate bending machines
